Runtime Test Services

Runtime Test Services

The Runtime Test Services (declared in srtest.h) are a set of APIs in the STRIDE Runtime that facilitate the writing of target based test code. These APIs make up an optional portion of the STRIDE Runtime and can be used to communicate additional information about tests to the host based reporting mechanism. These APIs also allow target test code to create additional test suites and test cases dynamically at runtime.

There are two ways of accessing these APIs: through C-based functions, or through a C++ base class from which you may derive your C++ test class. These are discussed below in C Test Functions, and C++ Test Classes sections below.

Refer to the SCL Reference Guide or the Runtime Developer's Guide for more detailed information about any of these APIs.

C Test Functions

The following C APIs are provided:

• srTestSuiteSetName: sets the name of the specified suite.
• srTestSuiteSetDescription: sets the description of the specified suite.
• srTestSuiteAddSuite: creates an additional sub-suite at runtime.
• srTestSuiteAddCase: creates an additional test case at runtime.
• srTestSuiteAddAnnotation: creates a suite annotation at runtime.

• srTestCaseSetName: sets the name of the specified test case.
• srTestCaseSetDescription: sets the description of the specified test case.
• srTestCaseSetStatus: explicitly sets the status for the specified test case.
• srTestCaseAddComment: adds a comment to the specified test case.
• srTestCaseAddAnnotation: creates a test case annotation at runtime.

• srTestAnnotationAddComment: adds a comment to the specified annotation.

srTestSuiteSetName

The srTestSuiteSetName() routine is used to set the name of the specified test suite.

srWORD srTestSuiteSetName(srTestSuiteHandle_t tTestSuite, const srCHAR * szName)

Parameters	Type	Description
tTestSuite	Input	Handle to a test suite. srTEST_SUITE_DEFAULT can be used for the default test suite.
szName	Input	Pointer to a null-terminated string representing the name of test suite. Cannot be null.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

void tfsuite_setName(void)
{
  srTestSuiteSetName(srTEST_SUITE_DEFAULT, "Setting name for default suite");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfsuite_setName)
#endif

srTestSuiteSetDescription

The srTestSuiteSetDescription() routine is used to set the description of the specified test suite.

srWORD srTestSuiteSetDescription(srTestSuiteHandle_t tTestSuite, const srCHAR * szDescr)

Parameters	Type	Description
tTestSuite	Input	Handle to a test suite. srTEST_SUITE_DEFAULT can be used for the default test suite.
szDescr	Input	Pointer to a null-terminated string representing the description of test suite. Cannot be null.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>
void tfsuite_setDescription(void)
{
  srTestSuiteSetDescription(srTEST_SUITE_DEFAULT,
                            "Setting description for default suite");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfsuite_setDescription)
#endif

srTestSuiteAddSuite

The srTestSuiteAddSuite() routine is used to add a new test suite to the specified test suite.

srTestSuiteHandle_t srTestSuiteAddSuite(srTestSuiteHandle_t tParent, const srCHAR * szName)

Parameters	Type	Description
tParent	Input	Handle to the parent test suite to which new test suite is to be added. srTEST_SUITE_DEFAULT can be used for the default test suite.
szName	Input	Pointer to a null-terminated string that represents the name of test suite. If null, the default host naming scheme will be used.

Return Value	Description
srTestSuiteHandle_t	Handle of the newly created test suite. srTEST_SUITE_INVALID indicates failure to create test suite.

#include <srtest.h>

void tfsuite_addSuite(void)
{
  srTestSuiteHandle_t subSuite =
  srTestSuiteAddSuite(srTEST_SUITE_DEFAULT, "tf Sub Suite");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfsuite_addSuite)
#endif

srTestSuiteAddCase

The srTestSuiteAddCase() routine is used to add a new test case to the specified test suite.

srTestCaseHandle_t srTestSuiteAddCase(srTestSuiteHandle_t tParent, const srCHAR * szName)

Parameters	Type	Description
tParent	Input	Handle to the parent test suite to which new test case is to be added. srTEST_SUITE_DEFAULT can be used for the default test suite.
szName	Input	Pointer to a null-terminated string that represents the name of test case. If null, the default host naming scheme will be used.

Return Value	Description
srTestCaseHandle_t	Handle of the newly created test case. srTEST_CASE_INVALID indicates failure to create test case.

#include <srtest.h>
#include <stdio.h>

void tfsuite_addCase(void)
{
  for (int count = 0; count < 5; ++count)
  {
    char szName[25];
    sprintf(szName, "dynamic test case %d", count);
    srTestCaseHandle_t test = srTestSuiteAddCase(srTEST_SUITE_DEFAULT, szName);
    srTestCaseAddComment(test, NULL, "this is a dynamic test case");
    srTestCaseSetStatus(test, srTEST_PASS, 0); 
  }
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfsuite_addCase)
#endif

srTestSuiteAddAnnotation

The srTestSuiteAddAnnotation() routine is used to add a new annotation to the specified test suite.

srTestAnnotationHandle_t srTestSuiteAddAnnotation(rTestSuiteHandle_t tParent, srTestAnnotationLevel_e eLevel, const srCHAR * szName, const srCHAR * szDescr)

Parameters	Type	Description
tParent	Input	Handle to the parent test suite to which new annotation is to be added. srTEST_SUITE_DEFAULT can be used for the default test suite.
eLevel	Input	Annotation level. Cannot be empty. srTEST_ANNOTATION_LEVEL_TRACE, srTEST_ANNOTATION_LEVEL_DEBUG, srTEST_ANNOTATION_LEVEL_INFO, srTEST_ANNOTATION_LEVEL_WARN, srTEST_ANNOTATION_LEVEL_ERROR, srTEST_ANNOTATION_LEVEL_FATAL
szName	Input	Pointer to a null-terminated string that represents the name of annotation. If null, the default host naming scheme will be used.
szDescr	Input	Pointer to a null-terminated string representing the description of annotation. If null, description will be empty.

Return Value	Description
srTestAnnotationHandle_t	HHandle of the newly created annotation. srTEST_ANNOTATION_INVALID indicates failure to create annotation.

#include <srtest.h>

void tfsuite_addAnnotation(void) 
{
  for (int count = 0; count < 5; ++count)
  {
    char szName[25];
    sprintf(szName, "annotation %d", count);
    srTestAnnotationHandle_t annot = 
                     srTestSuiteAddAnnotation(srTEST_SUITE_DEFAULT,
                                              srTEST_ANNOTATION_LEVEL_ERROR,
                                              szName,
                                              "description of annotation");
  }
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfsuite_addAnnotation)
#endif

srTestCaseSetName

The srTestCaseSetName() routine is used to set set the name of the specified test case.

srWORD srTestCaseSetName(srTestCaseHandle_t tTestCase, const srCHAR *szName)

Parameters	Type	Description
tTestCase	Input	Handle to a test case. srTEST_CASE_DEFAULT can be used for the default test case.
szName	Input	Pointer to a null-terminated string representing the name of test case. Cannot be null.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

void tfcase_setName(void)
{
  srTestCaseSetName(srTEST_CASE_DEFAULT, "Setting name for default case");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfcase_setName)
#endif

srTestCaseSetDescription

The srTestCaseSetDescription() routine is used to set the description of the specified test case.

srWORD srTestCaseSetDescription(srTestCaseHandle_t tTestCase, const srCHAR * szDescr)

Parameters	Type	Description
tTestCase	Input	Handle to a test case. srTEST_CASE_DEFAULT can be used for the default test case.
szDescr	Input	Pointer to a null-terminated string representing the description of test case. Cannot be null.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

void tfcase_setDescription(void)
{
  srTestCaseSetDescription(srTEST_CASE_DEFAULT,
                           "Setting description for default case");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfcase_setDescription)
#endif

srTestCaseSetStatus

The srTestCaseSetStatus() routine is used to set the result of test case.

srWORD srTestCaseSetStatus(srTestCaseHandle_t tTestCase, srTestStatus_e eStatus, srDWORD dwDuration)

Parameters	Type	Description
tTestCase	Input	Handle to a test case. srTEST_CASE_DEFAULT can be used for the default test case.
eStatus	Input	Result of the test. Possible values are: srTEST_FAIL srTEST_PASS srTEST_NOTINUSE srTEST_INPROGRESS srTEST_DONE - applicable to dynamic cases - sets the status to pass unless already set to fail or not-in-use
dwDuration	Input	The duration of the test in clock ticks. Using "0" allows the STRIDE Runtime (Intercept Module) to set the time automatically.

Return Value	Description
srOK	Success
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.

#include <srtest.h>

void tfcase_setStatus(void)
{
  srTestCaseSetStatus(srTEST_CASE_DEFAULT, srTEST_PASS, 0);
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfcase_setStatus)
#endif

srTestCaseSetStatusEx

The srTestCaseSetStatusEx() routine is used to set the result of test case and allow specification of an extendedFailureCode.

srWORD srTestCaseSetStatus(srTestCaseHandle_t tTestCase, srTestStatus_e eStatus, srDWORD dwDuration, srLONG lExtendedFailureCode)

Parameters	Type	Description
tTestCase	Input	Handle to a test case. srTEST_CASE_DEFAULT can be used for the default test case.
eStatus	Input	Result of the test.
dwDuration	Input	The duration of the test in clock ticks. Using "0" allows the STRIDE Runtime (Intercept Module) to set the time automatically.
lExtendedFailureCode	Input	The Stride framework uses the extendedFailureCode to capture the numeric results of test method when the test method fails via a numeric (non-void, nonbool) return type.

Return Value	Description
srOK	Success
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.

#include <srtest.h>

void tfcase_setStatusEx(void)
{
  srTestCaseSetStatusEx(srTEST_CASE_DEFAULT, srTEST_FAIL, 0, -5);
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfcase_setStatusEx)
#endif

srTestCaseAddComment

The srTestCaseAddComment() routine is used to add a comment (aka a log) to be reported with the specified test case.

srWORD srTestCaseAddComment(srTestCaseHandle_t tTestCase, const srCHAR * szLabel, const srCHAR * szFmtComment, ...)

Parameters	Type	Description
tTestCase	Input	Handle to a test case. srTEST_CASE_DEFAULT can be used for the default test case.
szLabel	Input	Pointer to a null-terminated string specifying the comment's label.
szFmtComment	Input	Pointer to a null-terminated string, which can be formatted, representing the comment. Cannot be null.
...	Input (Optional)	Variable argument list to format the comment szFmtComment.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

void tfcase_addComment(void)
{
  srTestCaseAddComment(srTEST_CASE_DEFAULT, "Note",
                       "this comment should print %s", "A STRING");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfcase_addComment)
#endif

srTestCaseAddAnnotation

The srTestCaseAddAnnotation() routine is used to add a new annotation to the specified test case.

srTestAnnotationHandle_t srTestCaseAddAnnotation(rTestCaseHandle_t tParent, srTestAnnotationLevel_e eLevel, const srCHAR * szName, const srCHAR * szDescr)

Parameters	Type	Description
tParent	Input	Handle to the parent test case to which new annotation is to be added. srTEST_CASE_DEFAULT can be used for the default test case.
eLevel	Input	Annotation level. Cannot be empty. srTEST_ANNOTATION_LEVEL_TRACE, srTEST_ANNOTATION_LEVEL_DEBUG, srTEST_ANNOTATION_LEVEL_INFO, srTEST_ANNOTATION_LEVEL_WARN, srTEST_ANNOTATION_LEVEL_ERROR, srTEST_ANNOTATION_LEVEL_FATAL
szName	Input	Pointer to a null-terminated string that represents the name of annotation. If null, the default host naming scheme will be used.
szDescr	Input	Pointer to a null-terminated string representing the description of annotation. If null, description will be empty.

Return Value	Description
srTestAnnotationHandle_t	HHandle of the newly created annotation. srTEST_ANNOTATION_INVALID indicates failure to create annotation.

#include <srtest.h>

void tfcase_addAnnotation(void) 
{
  for (int count = 0; count < 5; ++count)
  {
    char szName[25];
    sprintf(szName, "annotation %d", count);
    srTestAnnotationHandle_t annot = 
                     srTestCaseAddAnnotation(srTEST_CASE_DEFAULT,
                                             srTEST_ANNOTATION_LEVEL_ERROR,
                                             szName,
                                             "description of annotation");
  }
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfcase_addAnnotation)
#endif

srTestAnnotationAddComment

The srTestAnnotationAddComment() routine is used to add a comment (aka a log) to be reported with the specified annotation.

srWORD srTestAnnotationAddComment(srTestAnnotationHandle_t tTestAnnotation, const srCHAR * szLabel, const srCHAR * szFmtComment, ...)

Parameters	Type	Description
tTestAnnotation	Input	Handle to an annotation created using srTestSuiteAddAnnotation.
szLabel	Input	Pointer to a null-terminated string for the label. If null, the default label will be applied.
szFmtComment	Input	Pointer to a null-terminated string, which can be formatted, representing the comment. Cannot be null.
...	Input (Optional)	Variable argument list to format the comment szFmtComment.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

void tfsuiteAnnotation_addComment(void) 
{
  srTestAnnotationHandle_t annot = 
                           srTestSuiteAddAnnotation(srTEST_SUITE_DEFAULT,
                                                    srTEST_ANNOTATION_LEVEL_ERROR,
                                                    "annot",
                                                    "annot description");
  srTestAnnotationAddComment(annot,
                             srNULL,
                             "this comment should print %s", "A STRING");
}

#ifdef _SCL
#pragma scl_test_flist("testfunc", tfsuiteAnnotation_addComment)
#endif

C++ Test Classes

The Runtime Test Services C APIs work equally well from C test functions and C++ test classes. If, however, you are using C++ it might be more convinient for you to derive your C++ test classes from the Runtime Test Services C++ base class, srTest. That way you will have access to a set of simpler to use C++ classes.

The following C++ classes are provided:

• class srTest - base test class
• class srTestSuite - represents a test suite
• class srTestCase - represents a test case
• class srTestAnnotation - represents a test annotation

class srTest

The srTest class provides two Member Objects:

• testSuite of class srTestSuite
• testCase of class srTestCase

class srTestSuite

The srTest class provides the folowing methods:

method SetName

The SetName method is used to set the name of test suite.

srWORD SetName(const srCHAR * szName)

Parameters	Type	Description
szName	Input	Pointer to null-terminated string representing the name of test suite. Cannot be empty.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void suiteSetName()
  {
    testSuite.SetName("Setting name for suite");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method SetDescription

The SetDescription method is used to set the description of test suite.

srWORD SetDescription(const srCHAR * szDescr)

Parameters	Type	Description
szDescr	Input	Pointer to null-terminated string representing the description of test suite. Cannot be empty.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void suiteSetDescription()
  {
    testSuite.SetDescription("Setting description for suite");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method AddSuite

The AddSuite method is used to add a new test suite.

srTestSuite AddSuite(const srCHAR * szName = srNULL)

Parameters	Type	Description
szName	Input (Optional)	Pointer to null-terminated string that represents the name of test suite. If empty, the default host naming scheme will be used.

Return Value	Description
srTestSuite	Newly created test suite class.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void suiteAddSuite()
  {
    stride::srTestSuite suite = testSuite.AddSuite("tc Sub Suite");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method AddCase

The AddCase method is used to add a new test case to test suite.

srTestCase AddCase(const srCHAR * szName = srNULL)

Parameters	Type	Description
szName	Input (Optional)	Pointer to null-terminated string that represents the name of test case. If empty, the default host naming scheme will be used.

Return Value	Description
srTestCase	Newly created test case class.

Example

#include <srtest.h>
#include <sstream>

class srtest_class : public stride::srTest
{
public:
  void suiteAddSuite()
  {
    const std::string prefix("dynamic test case ");
    for (int count = 0; count < 5; ++count)
    {
      std::stringstream strm;
      strm << prefix << count;
      stride::srTestCase tc = testSuite.AddCase(strm.str().c_str());
      tc.AddComment("this is a dynamic test case");
      tc.SetStatus(srTEST_PASS);
    }
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method AddAnnotation

The AddAnnotation method is used to add a new annotation to test suite.

srTestAnnotation AddAnnotation(srTestAnnotationLevel_e eLevel, const srCHAR * szName = srNULL, const srCHAR * szDescr = srNULL)

Parameters	Type	Description
eLevel	Input	Annotation level. Cannot be empty. srTEST_ANNOTATION_LEVEL_TRACE, srTEST_ANNOTATION_LEVEL_DEBUG, srTEST_ANNOTATION_LEVEL_INFO, srTEST_ANNOTATION_LEVEL_WARN, srTEST_ANNOTATION_LEVEL_ERROR, srTEST_ANNOTATION_LEVEL_FATAL
szName	Input (Optional)	Pointer to null-terminated string that represents the name of annotation. If empty, the default host naming scheme will be used.
szDescr	Input (Optional)	Pointer to null-terminated string that represents the description of annotation. If empty, the description will be blank.

Return Value	Description
srTestAnnotation	Newly created annotation class.

#include <srtest.h>
#include <sstream>

class srtest_class : public stride::srTest
{
public:
  void suiteAddAnnotation()
  {
    for (int count = 0; count < 5; ++count)
    {
      std::stringstream strmName;
      std::stringstream strmDescr;
      strmName << "annotation " << count;
      strmDescr << "description of annotation " << count;
      stride::srTestAnnotation ta = 
                 testSuite.AddAnnotation(srTEST_ANNOTATION_LEVEL_INFO,
                                         strmName.str().c_str(),
                                         strmDescr.str().c_str());
    }
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

class srTestCase

The srTestCase class provides the following methods:

method SetName

The SetName method is used to set the name of test case.

srWORD SetName(const srCHAR * szName)

Parameters	Type	Description
szName	Input	Pointer to null-terminated string representing the name of test case. Cannot be empty.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void caseSetName()
  {
    testCase.SetName("Setting name for case");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method SetDescription

The SetDescription method is used to set the description of test case.

srWORD SetDescription(const srCHAR * szDescr)

Parameters	Type	Description
szDescr	Input	Pointer to null-terminated string representing the description of test case. Cannot be empty.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void caseSetDescription()
  {
    testCase.SetDescription("Setting description for case");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method SetStatus

The SetStatus method is used to set the result of the default test case.

srWORD SetStatus(srTestStatus_e eStatus, srDWORD dwDuration = 0)

Parameters	Type	Description
eStatus	Input	Result of the test. Possible values are: srTEST_FAIL srTEST_PASS srTEST_NOTINUSE srTEST_INPROGRESS srTEST_DONE - applicable to dynamic cases - sets the status to pass unless already set to fail or not-in-use
dwDuration	Input (Optional)	The duration of the test in clock ticks. The default is 0.

Return Value	Description
srOK	Success
srTEST_ERR_HANDLE_INVALID	Invalid handle.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void caseSetStatus()
  {
    testCase.SetStatus(srTEST_NOTINUSE, 0);
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method AddComment

The AddComment method is used to add a comment to test case.

srWORD AddComment(const srCHAR * szFmtComment, ...)

Parameters	Type	Description
szFmtComment	Input	Pointer to null-terminated string, which can be formatted, representing the comment. Cannot be empty.
...	Input (Optional)	Variable argument list to format the comment szFmtComment.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void caseAddComment()
  {
    testCase.AddComment("this comment should print %s", "A STRING");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

method AddAnnotation

The AddAnnotation method is used to add a new annotation to test case.

srTestAnnotation AddAnnotation(srTestAnnotationLevel_e eLevel, const srCHAR * szName = srNULL, const srCHAR * szDescr = srNULL)

Parameters	Type	Description
eLevel	Input	Annotation level. Cannot be empty.
szName	Input (Optional)	Pointer to null-terminated string that represents the name of annotation. If empty, the default host naming scheme will be used.
szDescr	Input (Optional)	Pointer to null-terminated string that represents the description of annotation. If empty, the description will be blank.

Return Value	Description
srTestAnnotation	Newly created annotation class.

#include <srtest.h>
#include <sstream>

class srtest_class : public stride::srTest
{
public:
  void caseAddAnnotation()
  {
    for (int count = 0; count < 5; ++count)
    {
      std::stringstream strmName;
      std::stringstream strmDescr;
      strmName << "annotation " << count;
      strmDescr << "description of annotation " << count;
      stride::srTestAnnotation ta = 
                 testCase.AddAnnotation(srTEST_ANNOTATION_LEVEL_INFO,
                                         strmName.str().c_str(),
                                         strmDescr.str().c_str());
    }
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif

class srTestAnnotation

The srTestAnnotation class provides the following methods:

method AddComment

The AddComment method is used to add a comment to an annotation created under a test suite.

srWORD AddComment(const srCHAR * szLabel, const srCHAR * szFmtComment, ...)

Parameters	Type	Description
szLabel	Input	Pointer to null-terminated string for the label. If null, the default label will be applied.
szFmtComment	Input	Pointer to null-terminated string, which can be formatted, representing the comment. Cannot be empty.
...	Input (Optional)	Variable argument list to format the comment szFmtComment.

Return Value	Description
srOK	Success
srERR	Null string passed in.
srTEST_ERR_HANDLE_INVALID	Invalid handle passed in.
srTEST_WARN_STR_TRUNCATED	String passed in was too large and was truncated.

#include <srtest.h>

class srtest_class : public stride::srTest
{
public:
  void suiteAnnotationAddComment()
  {
    stride::srTestAnnotation ta = 
                 testSuite.AddAnnotation(srTEST_ANNOTATION_LEVEL_INFO,
                                         "annot",
                                         "annot description");
    ta.AddComment("this comment on annotation should print %s", "A STRING");
  }
};

#ifdef _SCL
#pragma scl_test_class(srtest_class)
#endif