Introduction

The Posix SDK is a platform-specific package that contains the STRIDE Runtime source and PAL implementation, along with integration tools to build a stride library and a strideDaemon and a TestApp applications. It is intended for this article to be used as a reference.

Target Makefile

The SDK makefile provides targets for building the STRIDE Runtime library and two executable applications - a strideDaemon (for a multiprocess application environment), and an TestApp (see this for more information).

The default make target builds the STRIDE Runtime library. When a multiprocess runtime library is specified (see RTSINGLEPROC below), and a strideDaemon executable build as well. To build the test application, specify the testapp make target.

The testapp target compiles SCL source markup present in the Runtime source and therefore requires that the Build Tools be installed on your system and in your executable search path.

Configuration

The behavior of the makefile can be affected by setting certain make variable parameters. For example, the following make invocation will change the value of the TOOLCHAIN and DEBUG variables when making:

cd ~/stride/SDK/Posix/src
make TOOLCHAIN=arm DEBUG=1

The following variable are intended to be specified or overridden as needed:

TOOLCHAIN

The default compiler toolchain when TOOLCHAIN is set to x86 is gcc/g++/ar, which are assumed to be in your path. For any other TOOLCHAIN value, the toolchain tools are $(TOOLCHAIN)-linux-gcc/g++/ar where $(TOOLCHAIN) is replaced by the specified TOOLCHAIN setting. If your toolchain does not fit this pattern, you will need to modify the makefile or explicitly override values for CC, CPP, and AR.

LIBRARYTYPE

The default behavior of the makefile is to build the STRIDE Runtime as a static library. If you prefer a shared library, set this value to '.so'.

DEBUG

The default configuration compiles with optimization and NDEBUG defined. If you prefer debuggable binaries, set this value to 1.

RTSINGLEPROC

The default configuration, set to 1, compiles the runtime library with no multiprocess support. If you want multiprocess functionality, you can enable this by explicitly setting this value to 0.

STANDALONE_TESTAPP

The default configuration, set to 1, builds the TestApp as a standalone application. When set to 0 the TestApp is built as a multiprocess application.
The STANDALONE_TESTAPP variable is affected by the value of RTSINGLEPROC. If RTSINGLEPROC is 1 and STANDALONE_TESTAPP is 0, this is an invalid combination and STANDALONE_TESTAPP will automatically be set to 1.

S2SCOPTS

The STRIDE build process that produces the database and Intercept Module for the test application relies on target settings. These settings are passed as options to the stride compiler and are most conveniently stored in an options file. We provide a default options file with target settings that are appropriate for x86 Linux targets with GNU compilers -- this file is SDK/Posix/settings/stride.s2scompile in the SDK distribution.

We recommend that you make a copy of this file and adjust the settings as appropriate for your target. You can then set this variable - S2SCOPTS to the path to your settings file. This will cause the make process to use the specified target settings options instead of the default one provided in the SDK. This same settings file should ultimately be used for the STRIDE build integration with your application source code.

S2 Build Flags

The target Makefile sets the following Build Tool flags:

S2_BIND_FLAGS = --starting_suid=7000
S2_IM_FLAGS = --disable_access_class

The s2sbind and s2sinstrument flags are combined so that the test application only registers for test message IDs that are created in a higher range so that it doesn't conflict with other application processes.

Makefile Targets

The makefile included with the SDK supports the following targets:

all: builds the runtime library and daemon
library: builds the runtime library
daemon: builds library and--if RTSINGLEPRC is not zero--the STRIDE daemon
im: builds the STRIDE database and generates IM files
testapp: builds library, im and instrumented test application
clean: removes all generated files

Target API (stride.h)

The Posix SDK provides a simplified application interface for initializing the STRIDE subsystem and starting STRIDE messaging and IM threads. The API includes the following routines:

srBOOL strideInit(const strideIO_t * io)

This function initializes the STRIDE subsystem. The IO configuration is passed in as an argument. If this argument is NULL, then the process will attempt to attach to an already running runtime application (daemon) using shared memory for IPC. This function should only be called once per application and should be match with a call to strideUninit().

srBOOL strideUninit(void)

Terminates any threads that have been started with this API and uninitializes the STRIDE subsystem.

srBOOL strideCreateThread(strideThreadFunc_t entry, const srCHAR * name, void* param)

Creates a thread to be managed by the STRIDE subsystem. Threads created using this routine will be sent a palSTOP_EVENT notification (available from palWait) and should respond promptly to this event. The name parameter is used primarily for logging purposes.

strideCreateIMThread(name)

This is a macro that wraps the invocation of strideCreateThread() for intercept module entry point functions. Only the IM name must be provided.

void strideStopThread(srDWORD id)

Signals a thread to stop (sends palSTOP_EVENT) and joins it.

void strideExWaitForExit(void)

This function can be called by the main application thread to block until a termination signal (SIGTERM) is received. Internally it uses the pause function to wait for signals to be delivered and then checks if termination has occurred.

This function is optional - if you block some other way (e.g. create the application's message loop) do not call this function.

void strideExBlockExitSignals(srBOOL enable)

This function can be called by the main application thread to block termination signals (SIGTERM).

This function is optional - if you manage your termination signals behaviour do not call this function.

Target Integration

Here are a few examples of how to integrate the stride API into your application.

NOTE: The following code assumes that the intercept module was generated with a name of myintercept. Change all references to that name in your code to the chosen intercept module name.

Standalone Application Integration

The following code demonstrates how to integrate your application with the STRIDE Runtime. Your application might require other logic at startup - you can integrate the following calls according to your needs. Note that this code initializes the STRIDE subsystem and assumes a single standalone process that creates the STRIDE system threads as well as application threads.

#include <stdlib.h>
#include <unistd.h>
#include <stride.h>
#include "myinterceptIMEntry.h"

int main(int argc, char **argv)
{
    /* initialize the STRIDE subsytem using default I/O */
#ifdef __cplusplus
    strideIO_t io = {strideIO_t::strideDEFAULT};
#else
    strideIO_t io = {strideDEFAULT};
#endif
    if (strideInit(&io) != srTRUE)
        return -1;

    /* start all IM threads */
    if (strideCreateIMThread(myintercept) != srTRUE)
        return -1;

    /* application code here */
    strideExWaitForExit(); /* or block some other way (e.g. application's message loop) */

    /* stop all IM threads and uninitialize STRIDE subsystem */
    strideUninit();
    return 0;   
}

This sample code assumes you have generated your Intercept Module with a prefix name of myintercept.

NOTE: If you need to provide additional message processing threads, you can call strideCreateThread() for each additional thread that you wish to add (this must be called prior to your application code).

Multiprocess Application Integration

This code demonstrates how to integrate your application with the STRIDE Runtime in multiprocess mode. In this mode, the pre-packaged strideDaemon runs simultaneously with the application and provides the STRIDE IO and runtime thread initialization. The host communicates with the application process through the strideDaemon (or another STRIDE IO process). In this sample, the only difference with the preceding sample is the call to strideInit which, in this case, specifies no IO parameters which indicates to the API that the communication and runtime threads should not be started.

#include <stdlib.h>
#include <unistd.h>
#include <stride.h>
#include "myinterceptIMEntry.h"

int main(int argc, char **argv)
{
    if (strideInit(NULL) != srTRUE)
        return -1;

    if (strideCreateIMThread(myintercept) != srTRUE)
        return -1;

    strideExWaitForExit();

    strideUninit();
    return 0;   
}

Kernel Module Integration

The following code demonstrates how to integrate your kernel space module with the STRIDE Runtime. Your module might require other logic at startup - you can integrate the following calls according to your needs.

NOTE: You need to also have an active user space STRIDE enabled application (see above) that runs the core STRIDE Runtime and IO services. That application also must be built with -DPAL_KERNEL_UDP_PORT=nnnn, where the "nnnn" matches the value defined below.

Linux

#include <linux/module.h>

#if defined(STRIDE_ENABLED) && STRIDE_ENABLED
#define PAL_KERNEL_UDP_PORT 8888 /* value should match whatever is defined in the "user" STRIDE Runtime */
#include <stride.c> /* that's right, directly include the source file */ 
#endif /* STRIDE_ENABLED */

int init_module(void)
{
...
#if defined(STRIDE_ENABLED) && STRIDE_ENABLED
    strideInit(NULL);
#endif /* STRIDE_ENABLED */
...
    return 0;
}

void cleanup_module(void)
{
#if defined(STRIDE_ENABLED) && STRIDE_ENABLED
    strideUninit();
#endif /* STRIDE_ENABLED */
...
}

You don't need to compile any other source nor to link to any other library. Just make sure you pass the following extra flags to your compiler:

EXTRA_CFLAGS += -DSTRIDE_ENABLED=1 -I"$(STRIDE_DIR)/SDK/Posix/src" -I"$(STRIDE_DIR)/SDK/Runtime"

FreeBSD

#include <sys/module.h>
#include <sys/kernel.h>

#if defined(STRIDE_ENABLED) && STRIDE_ENABLED
#define PAL_KERNEL_UDP_PORT 8888 /* value should match whatever is defined in the "user" STRIDE Runtime */
#include <stride.c> /* that's right, directly include the source file */ 
#endif /* STRIDE_ENABLED */

/* The function called at load/unload. */
static int event_handler(struct module *module, int event, void *arg) {
        int e = 0; /* Error, 0 for normal return status */
        switch (event) {
        case MOD_LOAD:
            ...
#if defined(STRIDE_ENABLED) && STRIDE_ENABLED
            strideInit(NULL);
#endif /* STRIDE_ENABLED */
            ...
            break;
        case MOD_UNLOAD:
            ...
#if defined(STRIDE_ENABLED) && STRIDE_ENABLED
            strideUninit();
#endif /* STRIDE_ENABLED */
            ...
            break;
        default:
            e = EOPNOTSUPP; /* Error, Operation Not Supported */
            break;
        }
       
        return(e);
}

You don't need to compile any other source nor to link to any other library. Just make sure you pass the following extra flags to your compiler:

CFLAGS += -DSTRIDE_ENABLED=1 -I"$(STRIDE_DIR)/SDK/Posix/src" -I"$(STRIDE_DIR)/SDK/Runtime"

Posix PAL

PAL Configuration (palcfg.h)

The following parameters can be configured in palcfg.h to effect the behavior of the compiled pal source files.

PAL_DEFAULT_DEVICE_NAME: default IO device to use.
PAL_MAX_THREADS: max STRIDE integrated threads that can be managed by the STRIDE API.
PAL_MAX_TIMERS: max STRIDE timers that can be active in the system.

Posix SDK

Contents

Introduction

Target Makefile

Configuration

TOOLCHAIN

LIBRARYTYPE

DEBUG

RTSINGLEPROC

STANDALONE_TESTAPP

S2SCOPTS

S2 Build Flags

Makefile Targets

Target API (stride.h)

srBOOL strideInit(const strideIO_t * io)

srBOOL strideUninit(void)

srBOOL strideCreateThread(strideThreadFunc_t entry, const srCHAR * name, void* param)

strideCreateIMThread(name)

void strideStopThread(srDWORD id)

void strideExWaitForExit(void)

void strideExBlockExitSignals(srBOOL enable)

Target Integration

Standalone Application Integration

Multiprocess Application Integration

Kernel Module Integration

Linux

FreeBSD

Posix PAL

PAL Configuration (palcfg.h)

Navigation menu

Posix SDK

Introduction

Target Makefile

Configuration

TOOLCHAIN

LIBRARYTYPE

DEBUG

RTSINGLEPROC

STANDALONE_TESTAPP

S2SCOPTS

S2 Build Flags

Makefile Targets

Target API (stride.h)

srBOOL strideInit(const strideIO_t * io)

srBOOL strideUninit(void)

srBOOL strideCreateThread(strideThreadFunc_t entry, const srCHAR * name, void* param)

strideCreateIMThread(name)

void strideStopThread(srDWORD id)

void strideExWaitForExit(void)

void strideExBlockExitSignals(srBOOL enable)

Target Integration

Standalone Application Integration

Multiprocess Application Integration

Kernel Module Integration

Linux

FreeBSD

Posix PAL

PAL Configuration (palcfg.h)

Navigation menu

Search